Import an AWS EKS Cluster

This tutorial demonstrates how to import an AWS EKS cluster through the direct connection method. If you want to use the agent connection method, refer to Agent Connection.

Prerequisites

  • You have a Kubernetes cluster with KubeSphere installed, and prepared this cluster as the host cluster. For more information about how to prepare a host cluster, refer to Prepare a host cluster.
  • You have an EKS cluster to be used as the member cluster.

Import an EKS Cluster

Step 1: Deploy KubeSphere on your EKS cluster

You need to deploy KubeSphere on your EKS cluster first. For more information about how to deploy KubeSphere on EKS, refer to Deploy KubeSphere on AWS EKS.

Step 2: Prepare the EKS member cluster

  1. In order to manage the member cluster from the host cluster, you need to make jwtSecret the same between them. Therefore, get it first by executing the following command on your host cluster.

    kubectl -n kubesphere-system get cm kubesphere-config -o yaml | grep -v "apiVersion" | grep jwtSecret
    

    The output is similar to the following:

    jwtSecret: "QVguGh7qnURywHn2od9IiOX6X8f8wK8g"
    
  2. Log in to the KubeSphere console of the EKS cluster as admin. Click Platform in the upper-left corner and then select Cluster Management.

  3. Go to CRDs, enter ClusterConfiguration in the search bar, and then press Enter on your keyboard. Click ClusterConfiguration to go to its detail page.

  4. Click on the right and then select Edit YAML to edit ks-installer.

  5. In the YAML file of ks-installer, change the value of jwtSecret to the corresponding value shown above and set the value of clusterRole to member. Click Update to save your changes.

    authentication:
      jwtSecret: QVguGh7qnURywHn2od9IiOX6X8f8wK8g
    
    multicluster:
      clusterRole: member
    

    Note

    Make sure you use the value of your own jwtSecret. You need to wait for a while so that the changes can take effect.

Step 3: Create a new kubeconfig file

  1. Amazon EKS doesn’t provide a built-in kubeconfig file as a standard kubeadm cluster does. Nevertheless, you can create a kubeconfig file by referring to this document. The generated kubeconfig file will be like the following:

    apiVersion: v1
    clusters:
    - cluster:
        server: <endpoint-url>
        certificate-authority-data: <base64-encoded-ca-cert>
      name: kubernetes
    contexts:
    - context:
        cluster: kubernetes
        user: aws
      name: aws
    current-context: aws
    kind: Config
    preferences: {}
    users:
    - name: aws
      user:
        exec:
          apiVersion: client.authentication.k8s.io/v1alpha1
          command: aws
          args:
            - "eks"
            - "get-token"
            - "--cluster-name"
            - "<cluster-name>"
            # - "--role"
            # - "<role-arn>"
          # env:
            # - name: AWS_PROFILE
            #   value: "<aws-profile>"
    

    However, this automatically generated kubeconfig file requires the command aws (aws CLI tools) to be installed on every computer that wants to use this kubeconfig.

  2. Run the following commands on your local computer to get the token of the ServiceAccount kubesphere created by KubeSphere. It has the cluster admin access to the cluster and will be used as the new kubeconfig token.

    TOKEN=$(kubectl -n kubesphere-system get secret $(kubectl -n kubesphere-system get sa kubesphere -o jsonpath='{.secrets[0].name}') -o jsonpath='{.data.token}' | base64 -d)
    kubectl config set-credentials kubesphere --token=${TOKEN}
    kubectl config set-context --current --user=kubesphere
    
  3. Retrieve the new kubeconfig file by running the following command:

    cat ~/.kube/config
    

    The output is similar to the following and you can see that a new user kubesphere is inserted and set as the current-context user:

    apiVersion: v1
    clusters:
    - cluster:
        certificate-authority-data: LS0tLS1CRUdJTiBDRVJUSUZ...S0tLQo=
        server: https://*.sk1.cn-north-1.eks.amazonaws.com.cn
      name: arn:aws-cn:eks:cn-north-1:660450875567:cluster/EKS-LUSLVMT6
    contexts:
    - context:
        cluster: arn:aws-cn:eks:cn-north-1:660450875567:cluster/EKS-LUSLVMT6
        user: kubesphere
      name: arn:aws-cn:eks:cn-north-1:660450875567:cluster/EKS-LUSLVMT6
    current-context: arn:aws-cn:eks:cn-north-1:660450875567:cluster/EKS-LUSLVMT6
    kind: Config
    preferences: {}
    users:
    - name: arn:aws-cn:eks:cn-north-1:660450875567:cluster/EKS-LUSLVMT6
      user:
        exec:
          apiVersion: client.authentication.k8s.io/v1alpha1
          args:
          - --region
          - cn-north-1
          - eks
          - get-token
          - --cluster-name
          - EKS-LUSLVMT6
          command: aws
          env: null
    - name: kubesphere
      user:
        token: eyJhbGciOiJSUzI1NiIsImtpZCI6ImlCRHF4SlE5a0JFNDlSM2xKWnY1Vkt5NTJrcDNqRS1Ta25IYkg1akhNRmsifQ.eyJpc3M................9KQtFULW544G-FBwURd6ArjgQ3Ay6NHYWZe3gWCHLmag9gF-hnzxequ7oN0LiJrA-al1qGeQv-8eiOFqX3RPCQgbybmix8qw5U6f-Rwvb47-xA
    

    You can run the following command to check that the new kubeconfig does have access to the EKS cluster.

    kubectl get nodes
    

    The output is simialr to this:

    NAME                                        STATUS   ROLES    AGE   VERSION
    ip-10-0-47-38.cn-north-1.compute.internal   Ready    <none>   11h   v1.18.8-eks-7c9bda
    ip-10-0-8-148.cn-north-1.compute.internal   Ready    <none>   78m   v1.18.8-eks-7c9bda
    

Step 4: Import the EKS member cluster

  1. Log in to the KubeSphere console on your host cluster as admin. Click Platform in the upper-left corner and then select Cluster Management. On the Cluster Management page, click Add Cluster.

  2. Enter the basic information based on your needs and click Next.

  3. In Connection Method, select Direct connection. Fill in the new kubeconfig file of the EKS member cluster and then click Create.

  4. Wait for cluster initialization to finish.

Receive the latest news, articles and updates from KubeSphere


Thanks for the feedback. If you have a specific question about how to use KubeSphere, ask it on Slack. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.